Set Up Internet Connection For A New Mac

SET UP INTERNET CONNECTION FOR A NEW INSTALL THE SETUP

You are now all set to surf the Internet. Click Finish on the last window. No, as we will setup your new email account later.

5.How to setup internet connection on MikroTik routerboard?If you're setting up a new Mac, or if you've just used Mac OS X's clean. In the TCP/IP tab next to configure, select Using DHCP. In the Network window by Show, select Built-in Ethernet.

Make sure this IP address should fall within the DHCP range set up in the ISP router.Restart your modem and wireless router. 192.168.0.253) to the designated WAN port on the MikroTik router (generally Ether1). This is so timely, Owen IвЂ™m going through the same thing right now with Comcast, while also shopping for a new modem/router combo so I donвЂ™t have to lease from them.Manual IP: In this we manually assign an IP address (e.g. You need to connect internet to your device, please connect it and your MAC Address.One Response to Internet service just got creepy: How to set up a wireless router with Comcast internet service L.Pence Says: August 29th, 2011 at 11:20 am.

Set Up Internet Connection For A New Install The Setup

If you already have the WINBOX installed on your laptop/desktop - then make sure you have the latest version to avoid any configuration issues.Now, we are ready to proceed with the configuration setup -Step 1: Identify the DHCP Range of ISP (main) routerConnect an ethernet cable from the LAN port of the ISP (main) router to your Windows Laptop/Desktop in order to get internet connectivity on your device.Click on Windows + R buttons on the keyboard simultaneously.In the Run window that pops up, type вЂncpa.cplвЂ™ and hit Enter. Save the file and install the setup. Else you should go with the вЂњDynamic IPвЂќ setup which is faster than Static IP setup.Go to and download the latest вЂњWINBOXвЂќ Configuration Tool under the Tools and Utilities section to your desktop. For CCTV camera access or SQL server setup) as all the forwarding rules can only be assigned to a particular IP only. When you do this, everyone that is connected.Dynamic IP: Configure the WAN port on MikroTik Routerboard as a DHCP Client, so that the WAN port is dynamically assigned an IP address belonging to the DHCP pool on the main router when an ethernet cable is connected from the LAN port of the main router to the WAN port.We recommend вЂњStatic IPвЂќ setup if you are planning to forward any ports access from the ISP router to the routerboard (e.g.

(Note: Any port on the MikroTik router can be configured as an Internet/WAN port, in our case, we have selected the 1st port itself)Now, double click on the Winbox setup which you must be having it on your desktop/laptop already.Go to вЂNeighborsвЂ™ -> Click on detected router.Default username: admin. Attach another cable from the LAN port of the MikroTik router to your laptop/desktop. In this example, we will use the ether1 port as the default WAN port but you can use any port as WAN port but make sure the LAN port is also connected with that Ether port. Step 2: Configure a Static IP to the routerboard for internet accessNow detach the ethernet cable from your Laptop/Desktop and attach it to the WAN (Ether1) port of the routerboard, as illustrated below.

Choose an IPv4 address to be assigned to the WAN interface that belongs to the same subnet that has been set up on the ISP (main) router. Click on вЂ+вЂ™ to add a new address. If you had already assigned some username and password to the routerboard then use those credentials.Click вЂConnectвЂ™ to log in to the MikroTik router.Go to IP -> Addresses.

Click apply then OK.You will notice that a new rule is added that states that the specified gateway is reachable through ether1.Go to IP -> DNS. Enter the gateway вЂ192.168.1.1вЂ™ as obtained from step 1.5. Click on вЂ+вЂ™ to add a new route. Click Apply then OK.P.S.: /24 is equivalent of 255.255.255.0 - if the subnet mask was 255.255.0.0 then you must use notation of /16.Step 3: Configure the Internet Gateway & DNS SettingsGo to IP -> Routes.

This will add a dynamic route from MikroTik routerboard to the main router. (You can still manually configure the DNS settings on the routerboard as described in step 3.2 (Go to IP/DNS)Select вЂAdd default routeвЂ™ as вЂYesвЂ™. Now, use вЂNew TerminalвЂ™ to check connectivity with the вЂpingвЂ™ command.The second method is to configure the WAN port on MikroTik Routerboard as a DHCP Client, so that the WAN port is dynamically assigned and IP address belonging to the DHCP pool on the main router when an ethernet cable is connected from the LAN port of the main router to the WAN port.Follow these steps to set up WAN port as a DHCP client:- In вЂDHCPвЂ™ tab, select Interface as вЂether1вЂ™Leave вЂAdd Peer DNSвЂ™ and вЂAdd Peer NTPвЂ™ ticked as DNS servers and NTP servers set up on the main router will also be dynamically added to the MikroTik router. You can choose to use global standard DNS servers which are available for FREEOr you can use the same DNS server settings recommended by your local ISP.DNS configuration is important as it helps in resolving domain names into IPs.The internet connectivity has been set up on the routerboard with Static IP (192.168.1.253).

Set Up Internet Connection For A New Mac